The 6 Trouble Frequencies That could Ruin Your Mix Cheat Sheet

Stop the frustration and bring clarity and separation to your mixes. You'll be surprised just how much this information will help.

Download it Now!

New Music Gear Monday: Drawmer MC3.1 Monitor Controller

Drawmer MC3.1One almost essential accessory for any computer-based DAW is the monitor controller, and there are a lot of them to choose from these days in just about all price ranges. Most of them in the sub-$1,000 range, while quite capable, are usually without some feature or features that you wish it would have. That’s what makes the new Drawmer MC3.1 so compelling. It’s one of the few monitor controllers at that price point that has all the most wished-for features covered.

The Drawmer MC3.1 monitor controller (not to be confused with a computer interface with monitor control capabilities) first and foremost allows you to adjust the level of the control room monitors, but it also incorporates a number of features usually found in controllers costing many times more. For instance, it has 3 sets of speaker outputs plus a mono sub output that can be switched individually and simultaneously, making A/B comparisons a snap. Each output also has a level trim to provide precise channel matching.

As far as inputs, there are a total of 5 – 1 digital AES/SPDIF, 2 balanced analog inputs, a stereo RCA analog input on the rear panel, and a 3.5mm front panel AUX input with it’s own level control. The digital and balanced analog inputs utilize Neutrik XLR/1/4″ COMBI jacks. These inputs can be selected to feed two separate signal paths; one for the main speaker output, and a second for the Cue buss to either an external output or to the internal headphone amps. Speaking of which, there are actually two separate headphone amplifiers with individual level controls and input switching so the artist can listen to a different mix than the engineer. There’s also a built-in talkback circuit complete with level control, external mic input, and a footswitch control, which is a very cool and overlooked feature even on high-end controllers.

But the main function of a monitor controller is to control the level of your speakers and here the MC3.1 also has a few extra tricks as well. First of all, the level can be set either with the large variable volume control knob, or by a button that switches to a preset level, which many mixing for TV or films will love. There are also comprehensive mix checking facilities as well, including dim, mono and phase reversal switches, plus mute switches for left, right and both speakers. The MC3.1 also has the unusual feature of Band Solo, which allows the user to listen to just the low, mid or high frequency bands to hear how they’re being reproduced by the speakers. Finally, the unit has timed relay protection on all speaker outputs to prevent power up/down bangs.

The Drawmer MC3.1 monitor controller is packaged in a desktop wedge form factor in a rugged steel box with a stylish brushed aluminum cover. The retail price is $999 and you can find more details on this dedicated page from Transaudio, the U.S. importer for Drawmer.

 

Click Here to Leave a Comment Below

Leave a Reply: