Tag Archives for " Black Box Analog Design "

New Music Gear Monday: Black Box Analog Design HG-2 Plugin

Black Box Analog HG-2 pluginHow many times has it happened where you have a great mix going, but it just needs something a little extra to bring it all together? Of course, there are now a lot of plugins available to add some “glue” to your mix, but they usually bring just one sound to the party. The Black Box Analog Design HG-2 from Plugin Alliance is different in that it’s one of the most versatile plugins mix buss plugins of its type on the market.

Like the hardware version of the HG-2 that it’s modeled after, the Black Box Analog Design HG-2 plugin brings a wide range of harmonics to a mix, thanks to the careful emulation of the 6U8A pentodes and 12AX7 triodes found in the original model. There are separate gain controls for both the pentode and triode emulations so you can dial a blend between both. You can then adjust the Density control to drive both tubes harder without changing their relative balance or the plugin’s output level in order to get more girth and mass.

The Calibration menu emulates the internal trim adjustment in the original hardware unit by modifying the HG-2’s high-frequency response to produce Dark, Normal or Bright coloration. Then there’s the Air knob, which lets you add some extra 10kHz+ to open up the mix. The HG-2 also has a saturation circuit to add either tube sheen or blistering overdrive distortion to just low or high frequencies or across the entire frequency spectrum. There’s a lot that this plug can do, and it’s certainly a lot more than meets the eye.

The Black Box Analog Design HG-2 retails for $249 but it’s currently on sale for $149. There’s a 14 day free trial available. Check out the video for more info, or go right to the dedicated page on the Plugin Alliance site.