New Music Gear Monday: Slate Control Monitor Controller

Slate ControlOne of the most important components of a home or desktop studio is the monitor controller, and while there are more and more such devices on the market these days, not all are a good fit for many studios. For instance, the needs of someone working with a laptop mixing on headphones are completely different from someone who’s actually recording people in the room or needs the highest quality monitor signal path possible. The new Slate Control fits into the latter category, with features usually found on a full-blown recording console but that are often needed in today’s in-the-box world.

First of all, the Slate Control head can be used as either an independent table top module, integrated directly into the RAVEN MTX Mk2 or RAVEN Z3 armrest, or even integrated into an older analog console, since it’s only 7 inches deep. If a retrofit is in your stars, Slate Control adds 7 stereo monitor path inputs but also connects to the solo buss signal and logic inputs of your existing console for seamless control.

Regardless of the environment it’s being used, the controller has a wide array of pro features, including 3 speaker selections, each with an LFE Enable switch, and speaker B and C have trim controls for matching levels with speaker A. Speaking of LFE, the LFE Output has multiple modes with a 12dB per octave low pass filter that can be set at 80 or 120Hz, or a Direct Output Mode, along with Polarity and Level Trim. A CAL Mode also allows you to preset a reference level for the speakers, disabling the main control room volume control. The speaker section of the controller also features cut, mono compatibility and left speaker polarity functions as well.

Slate Control also has multiple cue outputs and headphone outputs with some very useful talkback functions. The Talkback System has both a built-in mic and external mic input, which allows both reverse talkback for instant communication with the artist, and a feature called Selectable Auto Talkback that engages the talkback automatically when the music stops.

All inputs and outputs are balanced and diode protected against accidental phantom power (48V) connections, with DB25 connections for inputs and outputs, and DB9 connections for Aux and Talkback Aux remote functions. There’s also an on-board USB Hub for iLok and phone charging, as well as an 1/8th inch input for playback from an mobile phone. Best of all, the audio signal path was designed by famed audio developer Paul Wolf so the audio quality if top-notch.

The Slate Control isn’t inexpensive at $2,499, but neither are the other high-end controllers on the market that offer similar features and quality. Check out the dedicated page here for more information.

The Mix Fix Playbook